Schnellsuche 
Digitalreceiver
DBox2-Tuning
IDE-Interface
Festplatten
Zubehör
Ersatzteile
Reparatur
Restposten
Zuletzt angesehen: 

 

JM20330

JM20330Serial ATA Bridge Chip
 
Art.Nr.:8003
Gewicht:0,01 kg
Lieferzeit: sofort lieferbar

ab  
Einzelpreis: 2,96 €


 
In den Warenkorb
Aktueller Lagerbestand: 800 Stück
 
Nettopreise (exkl. MwSt 19%)
 
ab 1 Stück:      2,49 Euro
ab 160 Stück:  2,19 Euro
ab 320 Stück:  1,99 Euro
ab 480 Stück:  1,79 Euro
ab 800 Stück:  1,69 Euro
 

Overview
The JM20330 is a single chip solution for serial and parallel ATA translation. It includes the Serial ATA PHY, Link, Transport, and Parallel ATA (application layer) controller. The Serial ATA physical, link, and transport layers are compliant to Serial ATA 1.0 JM20330 supports a 1.5GHz data rate.The application layer supports both the ATA register command set and PACKET command set, which could drive both Hard Disk Drive and ATAPI Optical Storage such as CR-ROM, CD-RW, DVD-ROM, DVD-RW, etc. The Serial ATA and the Parallel ATA application layer support both host and device operation and can be configured through a single pin.
 
Feature
Compliance
• Serial ATA 1.0 Specification compliant
 
Overall
• ATA/ATAPI PIO mode 0 to 4
• ATA/ATAPI Ultra DMA of transfer rate 16.7, 25, 33, 48, 66, 100, 133, and 150MB/s.
• ATA/ATAPI LBA48 addressing mode associated with 2-byte sector count
• Support Serial ATA hot-plug
• Ultra low power consumption
• Work for both AC and DC couple between the transmitter and the receiver
• Provide specified OOB signal detection and transmission
• Support Spread Spectrum Clocking to reduce EMI
• Support 20MHz, 25MHz, 30MHz or 40MHz Reference Clock
• Support Partial/Slumber power management
• Provide adjustable TX signal amplitude and pre-emphasis level
• Master/Slave support
 

 
Kunden, die diesen Artikel gekauft haben, kauften auch: